Please Scroll down and follow the proper instructions:

Blackberry 8800 8300 8310 8320 Curve Unlock Code Entry Instructions

How to Enter Unlock Codes on BlackBerry 8800 8300 Curve:

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

1. Go to settings menu => and then Options
2. Select Advanced options => and then Sim card
3. Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4. Type MEP then [ALT BUTTON] then 2 on your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
5. You should be presented with a prompt "Enter Network MEP Code". Type in the unlock code received from CellUnlock.net and press in the track wheel / jog dial to confirm
6. Your phone is now unlocked

Blackberry 8100 Unlock Code Entry Instructions

How to Enter Unlock Codes on BlackBerry 8100 Pearl:

Step Action
1 Insert SIM into device
2 Power phone on and Turn off the radio (Turn Wireless Off option) VERY IMPORTANT.
3 Select "Options" THEN SELECT ADVANCED OPTIONS
4 Scroll down and select "SIM Card"
5 Type "MEPPD" (please note that you will not see what you type on the screen)
6 Type "MEPP then [ALT BUTTON] then 2" (please note that you will not see what you type on the screen)
7 Enter the Unlock Code
8 Press enter
9 Reboot device. Device is now unlocked.

Blackberry 8700 Unlock Code Entry Instructions

How to Enter Unlock Codes on BlackBerry 8700:

8700c Unlocking Info

***** You must have a SIM card in your phone to complete these steps, Make sure the phone is not displaying the low battery warning! *****

go to settings
go to options
go to advanced options
go to sim card
Type MEPD (not case sensitive) (you will not see text appear on screen while typing)
Does it say Network active? if so your phone is locked
Hold the ALT Key while typing in MEPE (not case sensitive, and you will not see text appear on screen while typing)
It will say "Enter Network MEP Code, then you type in the unlock code, press in the jog dial to confirm.
Your phone is now unlocked

BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc.. Unlock Code Instructions

How to Enter Unlock Codes on BlackBerry 6xxx 7xxx: ie 6230, 7100, 7290 etc..

Select Options menu on BB.
Now you select SIM CARD menu. To be able to see this you have to type this on the keypad on phone : (TEXT WILL NOT APPEAR ON THE SCREEN until you enter the unlock code)
Type 'MEPD' for all models except 7100 in which case in case use 'MEPPD'.
Usually u should see "active" NET lock. Now in order to disable this lock type 'MEP2' respectively 'MEPP2' if phone is 7100 and will appear a dialog asking for code. NOTE: You must use the "alt" or "shift" key to enable numbers so example would be: m-e-p-"alt key"-2 Now you should see the place to enter your net unlock code.(if not, you didn't type in mep2 or mepp2 properly.)
Here you must enter the "NET Unlock Code" that we gave you.

Treo 680,650 600 Unlock Code Entry Instructions

How to Enter Unlock Codes on Treo 600, 650 and 680 Cell Phones

Remove Treo battery,
Insert incorrect SIM card (Any simcard that the phone does not accept)
Power on Treo-650, 'Sim not allowed' is displayed, click OK
Go to the dial pad, and use the stylus to enter MEP code . You must enter the code in the following fashion:
- *#*#(MEP-CODE)# then press dial (Where (MEP-CODE) is to be replaced by the ACTUAL code supplied by the unlocking software)
- For example if the software supplied 12345678 as your MEP code for your phone , you must enter the code as follows:
  
  *#*#12345678# , then press dial
  
  Again the above numeric code is for illustration purposes, please enter the MEP code as supplied by us.
Phone will reset and display sim lock removed

TREO 750 Unlock Code Entry Instructions

How to Enter Unlock Codes on the Treo 750

1)Insert NON-Cingular Sim card in the phone

2)The phone will ask for the Unlock Code

3)Please use your Stylus and choose the little Keyboard Icon on the bottom middle of the screen

4)Enter the code on the digital keyboard that appears on the screen

5)Then click again on the little keyboard Icon at the bottom middle

6) Click OK

7)Your phone is now unlocked

If you see a message that says "Timeout" just leave the phone on with that screen and the message will dissapear after a while and prompt you for the unlock code again

Cingular BlackJack & BlackJack II Unlock Code Entry Instructions

How to Enter Unlock Codes on a Cingular BlackJack

Step Action
1 Insert NON Cingular SIM into device

2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)

3 Enter the unlock code in the blank field

4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.

5 Press Ok
- The device is now unlocked and should continue booting

Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted
- NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:
- Power on your Phone
- Enter *#1546792*#
- Select Option 3 Network & Call Settings
- Select option 5 Network Mode
- Select GSM
This should resolve your problem.

Samsung:

If you have a model that's not listed, one of the 2 methods below will work.

P777, D357 , D807, D407

Power on without sim, type in #0111*unlock code#

ZX10, ZX20, A707, A437, X497, C417

Power on without sim, type in #7465625*638*Unlock code#

HP iPaq Unlock Code Entry Instructions

How to Enter Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 , etc)

Step Action
1 Insert NON Cingular SIM into device

2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)

3 Enter the unlock code in the blank field

5 Press Ok
- The device is now unlocked and should continue booting

On the Today screen, tap Start > Settings.
Tap the Phone Band icon.
Tap the Keyboard icon to open the virtual keyboard
Tap Shift and then Ctl key to enable the keys.
Tap the blank area below the band selection box to open the unlock tool.
Tap Shift and then Ctl to disable the keys.
Enter the 8-digit unlock code and tap OK when done.
Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
- Unlock successful.
- Unlock failed due to incorrect code. The user has three attempts to unlock. After three attempts, the device will refuse any more unlocking attempts. Perform a soft reset to reset the counter to perform additional unlocking attempts.
- Device is not ready for unlocking. This error message displays when the user tries to unlock when the phone application (not the device) is not in a steady state. It takes 30 seconds after powering on the phone for it to reach a steady state.

Sony-Ericsson Unlock Code Entry Instructions

How to Enter Unlock Codes on Sony-Ericsson Cell Phones

Switch ON your phone without Sim card
Press 1 time the left arrow
Press 2 times the button *
Press 1 time the left arrow
'Personalize with MNC2' will appear
You can now enter your unlock code
- If your phone has a 'JOGDIAL' (ex : SonyEricsson K700i) you must press 'Down arrow' instead of 'Left arrow' for step 2 & 3. We mean by 'Down arrow'' to direct the Jogdial down.

Motorola Subsidy Unlock Code Entry Instructions

How to Enter Subsidy/Unlock Codes on Motorola Cell Phones

Switch ON your phone with a not allowed Sim card (one that didn't come with the phone)
the phone show 'Enter Special Code' or 'Enter Subsidy Code' and you can now enter your unlock code
- Note: If you get the prompt "Contact Service Provider" or "Phone Blocked" , please leave your phone on at that prompt for upto 8 hours. This will reset the phone's internal timer and automatically change the prompt to "Enter Subsidy Code" , at which point you should enter the unlock codes exactly as provided.

LG Unlock Code Entry Instructions

How to Enter Unlock Codes On LG Mobile Phones

Step Action
1 Insert non-Cingular SIM card
2 Power on the handset
   - phone will display "phone restricted"
3 Select "Cancel"
   - phone will display "phone restriction code"
4 Enter the SIM Unlock code
5 Select "OK"
   - the handset is now successfully unlocked

Model : LG F2250
- With orange sim card in the start menu tape : 2945#*3311# handset show saved then return to startup screen press Menu key, choose Settings > Security > Sim Lock> Network > Deactivate, handset will now show 'Enter NCK' tape your unlock code and OK.
Model : LG U8110
- With a not allowed sim card in your phone enter Pin code then validate tape : 277634#*#, select 'Sim Unlock' menu enter NCK code then validate, your phone is now unlocked.
Model : LG U8210
- With a not allowed sim card enter Pin code then validate tape : 277634#*#, now you show test menu choose Sim test menu and tape : 2945#*#, choose Sim Unlock menu, handset show 'Enter NCK' tape code Simlock, then OK.
Model : LG U8150
- Switch ON your phone with a not allowed Sim card, compose : 277634#*#, go to menu 'Sim Lock' and enter your unlock code.
Model : All Others
- Switch ON your phone with an allowed sim card and compose :
  - 2945#*5101# - LG 510w
  - 1945#*5101# - LG 1200 & B1200
  - 2945#*5221# - LG 5200 & 52200
  - 2945#*5301# - LG 5300
  - 2945#*5401# - LG 5400
  - 2945#*70001# - LG 7020
  - 2945#*7101# - LG 7100
  - 2945#*1201# - LG 1100 & 1300
  - 2945#*70001# - LG 7250T & 1100
  - 2945#*2201# - LG C2200
  - 2945#*5301# - LG T5100
  - 2945#*3311# - C3310
- Go to 'Menu' and then to 'Settings', select 'Security', to finish select 'Network Provider' and select 'Desactivate' then type your unlock code.

LG CU-500 Unlock Code Entry Instructions

How-To Enter Unlock Codes on LG CU500 mobile phones:

Insert a non-Cingular SIM card into your LG CU 500 and power on your phone
When you get the invalid sim-card message/prompt, enter 159753#*# on your phones keypad
On the next screen enter the unlock code provided than press OK.

LG CU-575 Trax Unlock Code Entry Instructions

1. Put a non cingular sim in the phone ,phone says invalid smart chip

2. Now enter *#865625# then select option 1 and then again select 1 and enter your 16 digits code

LG CU-400 Unlock Code Entry Instructions

1-Insert non-Cingular SIM card

2-Power on the handset

- phone will display "Invalid SmartChip"

3-In Idle screen, enter 159753#*#

- phone will display "Enter NCK, Remaining 5"

4-Enter the 8 digit SIM Unlock code

5-Select "OK"

- the handset is now successfully unlocked

LG CU-320 Unlock Code Entry Instructions

1) Power on the Handset.
2) In Idle screen, input the special code "277634#*#".
3)Access the submenu "SIM Test" in Phone Test Mode.
4)Input the special code "2945#*#".
5)Access the submenu "SIM Unlock" which is just activated after the special code
6)Input the 8-digit Unlock code in the "Enter unlock code" input screen.
7)It will be unlocked.

Samsung P777, D357 , D807, D407 Unlock Code Entry Instructions

How-To Enter Unlock Codes on a Samsung P777, D357 , D807, D407 mobile phone:

Switch on your phone with a non-accepted SIM card. The phone will ask for 'Password'.
You can now enter your unlcok code. (Even if phone doesn't ask for a password, enter the unlock code)
If 'Insert Correct SIM card' message appears: enter #0111*code#

ZX10, ZX20, A707, X497, C417

Power on without sim, type in #7465625*638*Unlock code#

Pantech, HP, 8525, 3125, 2125 & all Windows Smartphones, Windows Pocket PC Phones:

Power on with incorrect sim, enter unlock code when prompted

Enter code using onscreen keyboard when unlocking a Pocket PC Phone

How to Enter Unlock Codes on Sidekick/Hiptop Cell Phones (all models):

1. Insert a SIM card from a different network provider and turn on the Sidekick. A dialog screen comes up, prompting you for the code.

2. The box will say:

Title: Special Code Required

Dialog: Enter code to enable SIM

Box for Code: 1-8 digits

Options: Enable or Cancel

3. In the upper right hand corner, the SIM is flashing where the signal strength should be. On entering the code, a dialog box comes up saying authenticating code. It’s unlocked. Enjoy.

In case you see the “Waiting for Activation Screen”, hit the menu key and the letter L key at the same time. The menu key is the top left key. By doing this, the waiting screen will go away and you will be able to make calls. For best results, hold down Menu and the L key until the Waiting for Activation screen disappears.

www.cellunlock.net

Easy Way to Unlock Your Phone